FINISH PANEL THICKNESS FREQUENCY (Hz) NRC SAA
125 250 500 1000 2000 4000
Fabric
1” (25 mm) 0.03 0.37 0.89 1.10 1.09 1.05 0.85 0.87
Fabric
2” (50 mm) 0.23 0.81 1.19 1.19 1.11 1.12 1.05 1.07
Claro
1 1/16" (27 mm) 0.04 0.34 0.81 1.00 1.03 0.99 0.80 .
STANDARDS, TESTS, AND APPROVALS
Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25.
Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of "Class A" (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the "Class A" requirement. Decoustics has a considerable number of composite panel tests on file.
Acoustical Data (ASTM C423: Type A Mounting as per ASTM E795)

MOUNTING METHODS
Mechanically mount only by first installing Decoustics supplied clips to the inside of the waffle recesses (coffers) using the template and printed instructions provided. Installer to supply all anchors, substrate hardware and fasteners.
In field, attach panel clips to panel backs, again using the template provided.
Only handle panels wearing clean, lightweight, white gloves during installation.
Install panels by connecting panel clips to coffer clips on one side and gently swinging the panel upwards to engage all four clips.
Follow manufacturer's instructions for field cutting of panels.

Note: The information provided in this Data Sheet is accurate to the best of our knowledge at the time of printing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed, to our specifications.

Note: Only handle panels wearing clean, lightweight, white gloves during installation. Follow manufacturer's printed instructions for installation as well as field cutting of panels.

...
FINISH EDGE OPTIONS SIZES
CONSTRUCTION
THICKNESS
NRC
 WEIGHT COLOR

Fabric or Vinyl
Resin: square, bevelled, radiused, stepped.

Aluminum: square, bevelled.
Fabric: Up to 48" x 48" (1220 mm x 1220 mm).

Vinyl: Up to 48" x 48" (1220 mm x 1220 mm).
Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) core.
Fabric corners are fully tailored (no exposed darting). Vinyl corners are heat sealed. A 1 mil clear vapor retarder is adhered to panel back.
1"
(25 mm)


1 1/2"
(38 mm)


2"
(50 mm)
 0.85



N/A



N/A

 0.90 psf
(4.40 kg/m2)


1.20 psf
(5.90 kg/m2)


1.52 psf
(7.50 kg/m2)
 As per finish selected

Claro
Aluminum: square edge. Claro coated.
Up to 48" x 48" (1220 mm x 1220 mm).
Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) core with a 1/16" (1.5 mm) thick 16 to 20 pcf (256 to 320 kg/m3) high density integral facer designed to receive a non-bridging acoustically transparent Claro coating. A 1 mil clear vapor retarder is adhered to panel back.
1 1/16"
(27 mm)


1 9/16"
(40 mm)


2 1/16"
(52 mm)
0.80



N/A



N/A
1.05 psf
(5.15 kg/m2)


1.40 psf
(6.84 kg/m2)


1.78 psf
(8.70 kg/m2)
Standard White
CSW-100 Light Reflectance 92%

Custom Colors mixed to match color chips