|
|
 |
DESCRIPTION
Decoustics Direct to Suspended Frame/Grid is an acoustical panel ceiling system. Panels are installed using a mechanical z-clip (slide and engage) method of fastening to a concealed metal suspension system.
For any given panel, a suspended ceiling will provide better acoustical absorption than if the panel is applied direct to a solid substrate e.g. gypsum board.
PANELS
All Decoustics panels panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, ellipses, vaults, acoustical domes, thicknesses, and finishes.
LIMITATIONS
Essentially non-accessible. Progressive removal of panels is typically necessary to access plenum space. However, limited, localized access can be accommodated if desired
DESIGN CONSIDERATIONS
A perimeter reveal 1" (25 mm) wide is required around all ceiling areas to facilitate installation of the z-clips. The reveal can be covered with an exposed crown or cornice type molding.
All lights, diffusers, speakers, smoke detectors, sprinklers, and similar items that penetrate or are located in the ceiling must be independently supported. The panel is not structurally capable of supporting the weight of any of these items.
When using speakers in the ceiling, it is recommended the speaker grill be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling. |
|
 |
 |
 |
|
 |
