DESCRIPTION Decoustics Suspended Accessible Reveal acoustical ceiling panels consist of a medium density core and an attractive range of finishes. The plenum or back side of panels is supplied complete with a clear vapor retarder and mounting clips. Typically employed in areas where a floating panel effect is desired, a minimum 1" (25 mm) reveal is required around each panel to facilitate installation. Panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards 3/4" (19 mm), moving sideways 1" (25 mm) and lowering. The frame or grid system is secured using hanger wires or rods. PANELS All Decoustics panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, vaults, acoustical domes, thicknesses and finishes. LIMITATIONS Panel spans or sizes are limited to 120" x 60" (3050 mm x 1525 mm) for fabric finished panels, considering fabric width availability, 120" x 48" (3050 mm x 1220 mm) for vinyl finished panels, and 72" x 48" (1830 mm x 1220 mm) for coated finishes. DESIGN CONSIDERATIONS A minimum space of 10" (250 mm) between the back of the panel and the structure above is required to install the Suspended Reveal system. Plenum space above ceiling is 100% accessible. All lights, diffusers, speakers, smoke detectors, sprinklers, and similar items that penetrate or are located in the ceiling must be independently supported. The panels are not structurally capable of supporting the weight of any of these items. When using speakers in the ceiling, it is recommended the speaker grill be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling.			RELATED DATA Decoustics 3-Part Guide Specification. MAINTENANCE Refer to appropriate Decoustics “Cleaning and Maintenance Instructions” for any specific finish.