 |
DESCRIPTION
Decoustics Suspended Reveal acoustical ceiling panels consist of a medium density core and an attractive range of finishes. The plenum or back side of panels is supplied complete with a clear vapor retarder and mounting clips.
Typically employed in areas where a floating panel effect is desired, a minimum 4" (100 mm) reveal is required around each panel to facilitate installation. Note: a progressive installation is possible which will allow a 1" (25 mm) reveal around each panel with the exception of the perimeter panels where the minimum 4" (100 mm) reveal is still required.
PANELS
All Decoustics panels panels are custom fabricated and offered in a variety of types, sizes, geometric shapes, ellipses, vaults, acoustical domes, thicknesses, and finishes.
LIMITATIONS
Panel spans or sizes are limited to 120" x 60" (3050 mm x 1525 mm) for fabric finished panels, considering fabric width availability, 120" x 48" (3050 mm x 1220 mm) for vinyl panels, and 72" x 48" (1830 mm x 1220 mm) for coated finishes.
DESIGN CONSIDERATIONS
A minimum space of 6" (150 mm) between the back of the panel and the structure above is required to install the Suspended Reveal system.
Plenum space above ceiling is largely non-
accessible. Individual de-installation of panels is possible if localized access is required.
All lights, diffusers, speakers, smoke detectors, sprinklers, and similar items that penetrate or are located in the ceiling must be independently supported. The panels are not structurally capable of supporting the weight of any of these items.
When using speakers in the ceiling, it is recommended the speaker grill be visibly mounted at the face of the panel. Speaker function creates air movement and any fabric covering the speaker will experience premature soiling.
|
|
|
|
|
RELATED DATA
Decoustics 3-Part Guide Specification.
MAINTENANCE
Refer to appropriate Decoustics “Cleaning and Maintenance Instructions” for any specific finish.
|
|
|
