STANDARDS, TESTS, AND APPROVALS
Surface Burning Characteristics (ASTM E-84): All panel components have a Flame Spread rating of less than 25.
Note: Building code requirements may necessitate composite panel testing based on specified finish. A panel comprised of "Class A" (Flame Spread of 25 or less) components does not necessarily produce a composite panel meeting the "Class A" requirement. Decoustics has a considerable number of composite panel tests on file.
Acoustical Data (ASTM C423: Type E400 Mounting as per ASTM E795).
FINISH PANEL THICKNESS FREQUENCY (Hz) NRC SAA
125 250 500 1000 2000 4000
Fabric
 1" (25 mm) 0.46 0.52 0.94 1.01 1.10 1.13 0.90 0.87
Fabric
 2" (50 mm)
0.42
0.77
1.05
1.09
1.09
1.08
1.00
0.97
Claro
 1 1/16" (27 mm)
0.39
0.63
0.83
1.05
1.05
1.00
0.90
.0.87
Quadrillo
QPP-19


QPP-25


QPP-50
Panel 1-1/8" (28 mm)
Core 3/4" (19 mm)

Panel 1-3/8" (353 mm)
Core 1" (25 mm)

Panel 2-3/8" (60 mm)
Core 2" (50 mm)
0.78


0.74


0.80
0.77


0.79


0.87
0.61


0.72


1.00
0.86


1.00


1.07
1.04


1.02


1.06
0.70


0.78


1.00
0.80


0.90


1.00
0.82


0.88


0.98

MOUNTING METHODS
Mechanically mount using installer supplied T-bar having a 15/16" (24 mm) face flange and 1-1/2" (38 mm) web height. Note: T-bar is first secured to factory installed DPC-2 clips mounted on panel backs and then the completed assembly is hung in place using hanger wires or rods typically on 48” (1220 mm) centers along each ‘T’ bar.
Only handle panels wearing clean, lightweight, white gloves during installation.
Follow manufacturer's printed instructions for installation as well as field cutting of panels.

 Note: The information provided in this Data Sheet is accurate to the best of our knowledge at the time of printing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed, to our specifications.

Note: Only handle panels wearing clean, lightweight, white gloves during installation.Follow manufacturer's printed instructions for installation as well as field cutting of panels.
FINISH EDGE OPTIONS SIZES
CONSTRUCTION
THICKNESS
NRC
 WEIGHT COLOR

Fabric or
Vinyl
Resin: square edge; bevelled; radiused; stepped.

Aluminum: square or bevelled.
Fabric: Up to 120" x 60" (3050 mm x 1525 mm).

Vinyl: Up to 120" x 48" (3050 mm x 1220 mm).

Finish width must be sufficient to cover panel, panel thickness, and wrap minimum 1" (25 mm) on back side.
Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) core.
Fabric corners are fully tailored (no exposed darting). Vinyl corners are heat sealed. A 1 mil clear vapor retarder is adhered to panel back.
1"
(25 mm)

1 1/2"
(38 mm)

2"
(50 mm)

 0.85



0.95


1.05		 0.90 psf
(4.40 kg/m2)

1.20 psf
(5.90 kg/m2)

1.52 psf
(7.50 kg/m2)
As per selected finish

Claro
Aluminum: Claro coated
Up to 72" x 48" (1830 mm x
1220 mm) and
60" x 60" (1525 mm x 1525 mm).

Handling larger panels may result in damage to finish. Consult Decoustics.
Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) core with a 1/16" (1.5 mm) thick 16 to 20 pcf (256 to 320 kg/m3) high density integral facer designed to receive a non-bridging acoustically transparent Claro coating. A 1 mil clear vapor retarder is adhered to panel back.
1 1/16"
(27 mm)


1 9/16"
(40 mm)


2 1/16"
(52 mm)
0.80



N/A



N/A

1.05 psf
(5.15 kg/m2)


1.40 psf
(6.84 kg/m2)


1.78 psf
(8.70 kg/m2)
.........................
...
Standard White CSW-100 Light Reflectance 92%

Custom colors mixed to match color chips

Quadrillo
Unfinished square kerf and spline, 3/32" (2.4 mm) edge banding veneer and solid wood face frame. Custom edge profiling on request.
48" x 60" (1220 mm x 1525 mm).
Panel consists of a 6 to 7 pcf (96 to 112 kg/m3) density mat faced core laminated between a layer of 1/4" (6 mm) thick Quadrillo face and a 1/8" (3 mm) HDF perforated backing board (QPP). Internal fire treated particle board framing as required for edge conditions.
Overall nominal thickness:
QPP-19
1- 1/8"
(28 mm)


QPP-25
1-3/8"
(35 mm)


QPP-50
2-3/8"
(60 mm)


0.80



0.90




1.00




2.80 psf
(13.68 kg/m2)

3.40 psf
(16.61 kg/m2)

5.5 psf
(26.85 kg/m2)
Anigre
Ash
Beech
Cherry
Mahogany
Maple
Oak
Paint Finish
Pear
Walnut


Custom on Request