DESCRIPTION Decoustics Low Frequency Tuner acoustical wall and ceiling panels consist of a multiple density core, with a membrane type absorber (drumskin) located within the core. The face of the panel is then finished with a fabric or vinyl . The installed panel provides acousticians with a method of controlling low frequency reverberation. Available in optimum 2" (50 mm) thickness, panels are supplied complete with factory installed devices for mounting e.g. slide and engage z-clips secured to clips or continuous wall or ceiling track. PANELS All Decoustics panels are custom fabricated and offered in a variety of geometric shapes and finishes. Panels are currently only available flat, and with square edges. MAINTENANCE Refer to appropriate Decoustics "Cleaning & Maintenance Instructions" for any specific finish. RELATED DATA Decoustics 3-Part Guide Specification.
					MOUNTING METHODS Walls Mount panels using mechanical fastening only (includes slide and engage z-clips, wall clips and/or track). Consult with fastener manufacturer to determine correct fastener to use for specific substrates, particularly plaster or gypsum board. Note: It is not always possible to secure panels or mounting hardware to a substrate support such as a steel stud. Ceilings Mechanically mount only. Refer to ceilings section for appropriate suspension method.